cuiyibin-1 发表于 2006-4-8 21:10

求解时的错误,帮忙看看！谢了！

This model requires more scratch space than available, currently      <BR> 55589281 words ( 212 MB).ANSYS was not able to allocate more memory   <BR> to proceed.Please shut down other applications that may be running    <BR> or increase the virtual memory on your system and rerun ANSYS.          <BR> Problem terminated. ？？<BR>什么意思？？帮忙,xiexie

linqus 发表于 2006-4-8 22:27

提示得很明白：内存不够。

cuiyibin-1 发表于 2006-4-9 15:35

<P>我内存512的，2000个结点怎么回不够？</P>

aspen 发表于 2006-4-9 20:28

回复：（cuiyibin-1）求解时的错误,帮忙看看！谢了！

<P>帮助里的一段话<BR>This message appears when you are running ANSYS in dynamic memory mode and ANSYS has attempted to allocate additional memory, but it failed because it could not find a large enough "chunk" of memory to proceed. <BR><BR>If you receive this message, specifying a higher -m value on the ANSYS execution command and executing ANSYS again may help. However, as noted above, if a large enough "chunk" of memory is still unavailable, changing the -m value will not help.</P>

cuiyibin-1 发表于 2006-4-11 11:28

回复：（aspen）回复：（cuiyibin-1）求解时的错误,帮...

<P>不好意思，问一下 mvalue 在哪里设定啊？</P>

AaronSpark 发表于 2006-4-12 00:17

回复：（cuiyibin-1）求解时的错误,帮忙看看！谢了！

把虚拟内存设置的大点，然后在启动时分配好workspac和dataspac

happyguygq 发表于 2006-4-13 10:01

<P>建议你在玩ansys的时候，不要开其他任何程序，512的内存也会不足。</P>
页: [1]
查看完整版本: 求解时的错误,帮忙看看！谢了！