求解时的错误,帮忙看看！谢了！

cuiyibin-1 · 发表于 2006-4-8 21:10

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？我要加入

x

This model requires more scratch space than available, currently 55589281 words ( 212 MB). ANSYS was not able to allocate more memory to proceed. Please shut down other applications that may be running or increase the virtual memory on your system and rerun ANSYS. Problem terminated. ？？ 什么意思？？帮忙,xiexie

linqus · 发表于 2006-4-8 22:27

提示得很明白：内存不够。

cuiyibin-1 · 发表于 2006-4-9 15:35

我内存512的，2000个结点怎么回不够？

aspen · 发表于 2006-4-9 20:28

帮助里的一段话 This message appears when you are running ANSYS in dynamic memory mode and ANSYS has attempted to allocate additional memory, but it failed because it could not find a large enough "chunk" of memory to proceed. If you receive this message, specifying a higher -m value on the ANSYS execution command and executing ANSYS again may help. However, as noted above, if a large enough "chunk" of memory is still unavailable, changing the -m value will not help.

cuiyibin-1 · 发表于 2006-4-11 11:28

不好意思，问一下 mvalue 在哪里设定啊？

AaronSpark · 发表于 2006-4-12 00:17

把虚拟内存设置的大点，然后在启动时分配好workspac和dataspac

happyguygq · 发表于 2006-4-13 10:01

建议你在玩ansys的时候，不要开其他任何程序，512的内存也会不足。

账号		自动登录	找回密码
密码			我要加入

求解时的错误,帮忙看看！谢了！

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

回复：（cuiyibin-1）求解时的错误,帮忙看看！谢了！

回复：（aspen）回复：（cuiyibin-1）求解时的错误,帮...

回复：（cuiyibin-1）求解时的错误,帮忙看看！谢了！

浏览过的版块