shafuji 发表于 2010-5-5 11:26

我的ANSYS10没有HYPER类的单元

最近要做点东西，忽然发现我的ANSYS10没有HYPER类的单元，哪位高手能指点小弟一下啊？？

sylvia 发表于 2010-5-5 11:50

最新几个版本的ANSYS里是没有HYPER类的单元，一般可以用PLANE单元或者SOLID单元代替
HYPER56
HYPER56 "2-D 4-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE182 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).


HYPER58
HYPER58 "3-D 8-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID185 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).



HYPER74
HYPER74 "2-D 8-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE183 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).



HYPER158
HYPER158 "3-D 10-Node Tetrahedral Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID187 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).



HYPER84
HYPER84 "2-D Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE182/183 should be used instead - it supports more than Mooney-Rivlin or Blatz-Ko with TB,HYPER.



HYPER86
HYPER86 "3-D Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID185 should be used instead - it supports more than Mooney-Rivlin or Blatz-Ko with TB,HYPER.

shafuji 发表于 2010-5-5 15:38

回复 沙发 sylvia 的帖子

谢谢啊，我来试试看。
页: [1]
查看完整版本: 我的ANSYS10没有HYPER类的单元