我的ANSYS10没有HYPER类的单元

shafuji

最近要做点东西，忽然发现我的ANSYS10没有HYPER类的单元，哪位高手能指点小弟一下啊？？

sylvia

最新几个版本的ANSYS里是没有HYPER类的单元，一般可以用PLANE单元或者SOLID单元代替
HYPER56  
  HYPER56 "2-D 4-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE182 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).

  
HYPER58  
  HYPER58 "3-D 8-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID185 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).


  
HYPER74  
  HYPER74 "2-D 8-Node Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE183 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).


  
HYPER158  
  HYPER158 "3-D 10-Node Tetrahedral Mixed u-P Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID187 should be used instead - it supports more than Mooney-Rivlin with TB,HYPER, and toggles Mixed u-P via KEYOPT(6) (note that Mixed u-P formulations in HYPERxx and 18x elements are slightly different).


  
HYPER84  
  HYPER84 "2-D Hyperelastic Solid" was undocumented at ANSYS 10.0. PLANE182/183 should be used instead - it supports more than Mooney-Rivlin or Blatz-Ko with TB,HYPER.


  
HYPER86  
  HYPER86 "3-D Hyperelastic Solid" was undocumented at ANSYS 10.0. SOLID185 should be used instead - it supports more than Mooney-Rivlin or Blatz-Ko with TB,HYPER.

shafuji

谢谢啊，我来试试看。