simon21 发表于 2005-9-10 17:22

[求助]请教一个关于ansys建模的问题

Boolean operation failed. Try adjusting the tolerance value on the BTOL command to some fraction of the minimum keypoint distance. Model Size (current problem)4.451204e-002, current BTOL setting 1.000e-005, minimum KPT distance 5.984424e-006.<BR>想问下，这个问题该怎么处理，我想把两个体加在一起，该怎么设置才行？ <BR>

hitvip 发表于 2005-9-10 20:10

I am a real rookie on ansys.Im glad to exchange my view with everyone.

<P>Im gladto exchange my viewwith everyone.<BR>I'm sorry that i can't understand your problem clearlly on following two points:<BR>first,the exact location of the two poits of your solidmodel in your problem<BR>second, IN ANSYS,THE POINT COINCIDENCE TOLERANCE CAN BEADJUSTED AUTOMATICALLY,BUT WHY DOESN'T IT WOK IN YOUR PROBLEM.<BR><BR><BR>SUGGESTION:MAY BE YOU CAN SET THE TORLERANCE A BIT LARGER.<BR><BR>I am a real rookie on ansys.</P>

FSI 发表于 2005-9-11 08:43

<P>另一个建议，检查你的几何模型，那里可能有问题。<BR><BR>如果不介意的话发一张图上来看看</P>
页: [1]
查看完整版本: [求助]请教一个关于ansys建模的问题