|
|
ANSYS allows two different types of restarts: the singleframe restart and the multiframe restart, which can be used for static or full transient structural analyses. The singleframe restart only allows you to resume a job at the point it stopped. The multiframe restart can resume a job at any point in the analysis for which information is saved. This capability allows you to do multiple analyses of a model and gives you more options for recovering from an abort.
The model must meet the following conditions to restart an analysis:
The analysis type must be either static (steady-state), harmonic (2-D magnetic only), or transient (full method only). No other analysis can be restarted.
At least one iteration must have been completed in the initial run.
The initial run should not have stopped due to a "killed" job, system break, or system crash.
You performed your initial analysis and generated the restart file under the same ANSYS version number.
这个是通常ansys里面的restart
至于：
好象就是意外或人为中断后,再可以继续算,
有三种类型
1.简单重启动
2.部分重启动(记不太请了)
3.完全启动
其中,第二\三中类型可以修改模型参数,再继续计算
是在ls－dyna中用的 |
评分
-
1
查看全部评分
-
|
发表于 2006-8-28 22:01
提升卡
变色卡
显身卡