美国联合技术研究中心 招聘机械诊断高级研究人员
本帖最后由 gczhang 于 2010-12-15 14:54 编辑Employment Opportunity in
Machinery DiagnosticsUnited Technologies Research Center (China) Ltd. United Technologies Research Center (UTRC) is an internationally recognized corporate research organization of United Technologies Corporation (UTC) that conducts research and development across a range of technology areas to drive its mission of “growth through innovation.”
UTRC partners with UTC business units and renowned external research organizations to impact organic growth of the Corporation through new product and process innovations.
The operating units of UTC include:
Pratt & Whitney (aircraft engines), Sikorsky (helicopters), Otis (elevators and escalators), Carrier (HVAC products), Hamilton Sundstrand (aerospace products), UTC Power (fuel cell products), and UTC Fire & Security (products & services). Our headquarters are in East Hartford, USA with partnerships worldwide and an office in Shanghai, China. United Technologies Research Center (China) Ltd. invites qualified individuals to apply for the following position in the Shanghai office. This position will compensate the chosen candidate at the local Shanghai market wage rate, and benefits will be administered based on local Shanghai benefit practices.
Energy and Mechanical Systems: Senior Mechanical Engineer
Job Requirements:· Solid background in dynamic modeling of rotating machinery (gear meshing, rolling element bearings, rotor, etc.) and model-based health monitoring and diagnostics. · Extensive experience in dynamic measurement, condition monitoring, fault diagnosis and prognosis of mechanical systems.· Familiar with signal processing techniques and algorithms for feature extraction of mechanical faults.· Ability to provide timely, accurate and detailed reports and presentations.
Preferred Candidates will possess the following:· Master or Ph.D. in Mechanical Engineering or a related area. · 2-5 years experience in mechanical condition monitoring and fault diagnosis.· In-depth knowledge of rotating machinery is preferred.· Ability to work effectively within multidisciplinary teams in both China and USA· Fluent English (both written and spoken) and excellent communication skills
zhangg@utrc.utc.com
很多招聘写出的要求很高很全，其实除了有些硬指标如学历之外，其它的像经验、掌握的工具等都不是那么严格的，关键要能通过面试时对能力、知识面以及语言能力的考查。 信息广场这里人气太差了，招聘广告发到这里好像没多少人能看到。专业讨论版人多又不让发。 本帖最后由 tenglang 于 2010-12-25 00:32 编辑
回复 3 # gczhang 的帖子
看,其实大部分人都看见了
只是看到这个职位,就知道需要专业的知识.毕竟来这的,都是专业技术人员. tenglang 发表于 2010-12-25 00:31 static/image/common/back.gif
回复 3 # gczhang 的帖子
看,其实大部分人都看见了
希望是这样，但我发在仿真论坛上的招聘，很快就收到了几份简历，这里的却一分也收不到，想不出是什么原因。 回复 5 # gczhang 的帖子
留个电话聊聊吧。发邮件你也不回哈 yhfcn 发表于 2010-12-29 10:51 static/image/common/back.gif
回复 5 # gczhang 的帖子
留个电话聊聊吧。发邮件你也不回哈
回了你的邮件，但你没收？
你是自动回复的：
您发给我的信件已经收到。
我会尽快回复您的,如果有急事请拨打我的电话:131********
yhfcn 发表于 2010-12-29 10:51 static/image/common/back.gif
回复 5 # gczhang 的帖子
留个电话聊聊吧。发邮件你也不回哈
我下午打电话给你吧 Dr. Zhang 招人呢，顶一个。{:{40}:} jarquine? 好久不见了！ 回复 10 # gczhang 的帖子
为什么一定要研究生呢,我觉得干这行最主要的是工作经验, 本帖最后由 gczhang 于 2010-12-30 10:20 编辑
从事现场诊断经验的确是非常重要的。我们的单位招聘要求也是工作性质决定的，没办法。我们是研究中心，这里的工程师约2/3是博士，1/3是硕士，没有本科生。我们也基本上不是做现场诊断的。 顶起来，继续招！ 我不是研究生,三年旋转机械故障诊断和动平衡工作经验
有无可能?
{:{39}:}
页:
[1]
2