zyh4014 发表于 2008-5-17 15:57

大家来指点下---ABAQUS运行时错误，怎么办？

58 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.
82160 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
The number of history output requests has exceeded 10000, the value of the ABAQUS variable 'max_history_requests.' Reduce the number of requests, increase the value of this variable, or deactivate this test by setting 'max_history_requests=0' in the abaqus_v6.env file. Significant performance problems will occur if these requests are maintained. Consider requesting specific tensor components or requesting field output from which history data may be extracted.
Analysis Input File Processor exited with an error.

zhangmeng 发表于 2008-5-19 09:16

某个单元集合在tie中重复充当从节点，这样无法约束
你应该实现建立约束链条

zyh4014 发表于 2008-5-21 20:34

谢谢主任

我修改了，还是有错，2 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.
24306 elements have missing property definitions. The elements have been identified in element set ErrElemMissingSection.
The elset or tracer set parameter is required on the *element output option for this output database history request
Analysis Input File Processor exited with an error.
我的inp文件太大了，传不上来——让您看错误，这不我快要被炒了。。。

zjxinyan 发表于 2008-5-28 11:03

同问

Warning:   Not all the nodes that have been adjusted are printed.
Errors:
8 nodes are used more than once as a slave node in *TIE keyword. These constraints are not removed either due to the presence of *CONSTRAINT CONTROLS,NO CHANGES keyword or because removing the constraints might affect the model. The nodes have been identified in node set ErrNodeOverconTieSlave.

Analysis Input FileProcessor exited with an error.

[ 本帖最后由 zjxinyan 于 2008-5-28 11:06 编辑 ]

zjxinyan 发表于 2008-5-28 11:04

若有人能帮忙，我上传下inp文件。谢谢！

若有人能帮忙，我上传下inp文件。谢谢！

sunshine2u 发表于 2008-6-19 21:37

检查一下是否定义了共用一条线的两个面，选其中一个面删除沿线的网格。第二，发现可能一个部件没有定义材料属性。

gzhaoyang 发表于 2013-1-4 16:38

我也遇到了这样的问题，
约束绑定，是否关键是如何选择主面和从面呢
页: [1]
查看完整版本: 大家来指点下---ABAQUS运行时错误，怎么办？