jingjiajia 发表于 2007-10-29 21:23

我遇到这种问题了,急求解答

我模态分析在运行中出现这种错误:
Fatal Error; Run Terminated
Sun Oct 28, 2007   19:48:23
An error has occurred while requesting an additional
159.153 megabytes of memory from the operating system.
To correct this problem, you may need to increase the amount
of swap space on your system.You may also need to increase
the memory usage limits that are set for your system.
For large problems you can also try decreasing the
solram allocation setting.
At least 1.49838 gigabytes of memory are needed to run this design study.
For more information, you can search for the term
"swap space" in the online help.
我搞不清楚怎么回事,我的硬件配置都达到要求了的,内存是2G的,AMD4000+的,感觉不会是配置不够。

[ 本帖最后由 rodge 于 2007-10-31 00:57 编辑 ]

liyangcdm 发表于 2007-10-29 21:51

应该是虚拟内存的设置问题
物理内存再大,还是要设置虚拟内存的
系统会将一些暂时不用的数据放到虚拟内存中。

octopussheng 发表于 2007-10-29 22:25

对,这个可能是硬盘空间的问题了

xiven2008 发表于 2007-10-30 07:49

实在不行就想法在LINUX 或UNIX平台上运行ANSYS进行求解,那样就没有内存不够的问题麻烦

xuruikl 发表于 2007-10-30 19:19

回复 #3 octopussheng 的帖子

我赞成你的看法
把工作目录那个盘清理下
多留点空间给计算用
页: [1]
查看完整版本: 我遇到这种问题了,急求解答