VibInfo 发表于 2007-6-2 08:15

Hypermesh菜单上的关键字释意(按字母排序)

HyperMesh Panels Listed Alphabetically

accelsCreates or updates accelerations.
align nodeProjects nodes to an imaginary line passing through two nodes.
animation subpanelAllows you to control the display of your model during animation.
apply resultApplies a displacement result to the nodes.
assembliesCreates collections of components.
automeshInteractively or automatically creates meshes on surfaces.
automeshing module   A subpanel for most of the plate and shell meshing operations that allows you to work interactively on mesh parameters.
axis labelsEdits axis label information.
axis scalingModifies plot axes.
barsCreates or updates bar2 or bar3 elements.
beam xsect   Calculates beam section properties
borderEdits the border of an XY plot.
build menuRedefines the layout of the HyperMesh menu system.
cardAllows you to select the entities that are viewed in the card image panel.
check elemsVerifies the quality of elements. Checks warp, aspect, skew, angles, length, jacobian, connectivity, and duplicates.
circlesCreates circles and arcs.
cntl card   Allows you to edit solver specific data on a set of entities.
collectorsCreates components that group data together.
color   Modifies the color attributes of collectors.
colors subpanel   Located on the options panel; controls user-interface colors.
command subpanel   Located on the files panel; executes a HyperMesh command file.
composites   Aligns the element material angle of a mesh of shell elements and allows you to review material angle and ply directions.
conesCreates a surface or mesh for cones or cylinders.
config editChanges the configuration of existing elements.
constraintsCreates or updates constraints or enforced displacements on nodes.
constr screen   Defines data for truncation threshold and maximum number of constraints to be retained per region, per load case for a given response type.
contour   Creates contour or assignment plots of results.
control vol   Creates control volumes.
convert   Allows you to exchange some data between different solver formats
countSums the entities in the database.
create nodes   Creates nodes by specifying the x, y, z coordinates, picking on existing geometry, on line, or between nodes.

curve attribsCreates and edits curves.
dconstraints   Allows you to create constraints for optimization problems.
defeature   Removes surface features.
deformedCreates deformed plot based on displacement results.
deleteDeletes data from the database.
dependencyFinds nodes that have multiple DOF constraints.
dequations   Allows you to create user-defined functions for constraints and/or objective functions.

desvar link   Allows you to link a design variable to other design variables.
detachDetaches elements from adjoining elements.
displayTurns collectors on and off for viewing.
distanceFinds the distance or angle between nodes.
dragCreates a surface or mesh by dragging nodes, lines, or elements.
dummy   Allows you to rotate the dummy assemblies or specify the position of the H-Point of a dummy assembly.
edgesFinds free edges and equivalences nodes on edges.
edit curvesCreates or edits new or existing curves from files or math expressions.
edit elementBuilds, combines, and splits elements.
elem offset   Creates solid elements or layers of plate or shell elements based on a plate or shell element by offsetting the shell elements in a direction normal to the surface they form.

elem typesSelects and changes existing element types.
ellipsoids   Creates and modifies single or multiple ellipsoids and cylinders.
entity sets   Creates sets of nodes or elements.
equations   Creates, reviews, and updates equations.
export subpanel   Exports HyperMesh data to solver input formats.
facesFinds free faces and equivalences nodes on surfaces.
fatigue   Allows you to write stress/strain results from finite element analysis to an external file that can be used to set up fatigue analysis in a supported fatigue solver.

VibInfo 发表于 2007-6-2 08:16

fd blocksProvides access to the Finite Difference menu panel.
featuresDisplays the edges of a model as one-dimensional plot elements, providing a visualization tool to see the edges of a complex model.
fe joints   Creates, reviews, or updates joints.
filesSubpanels allow you to save and retrieve files, import and export data, specify templates and results files, and run command files.
filletsCreates or deletes fillets between two lines.
findFinds entities (and IDs) in the database.
fluxCreates or updates flux loading to nodes.
forcesCreates or updates forces.
gapsCreates or updates gap elements.
gauge   Creates a single design variable (DESVAR) and multiple property relation (DVPREL1) cards for the components selected for size optimization.
geom cleanup   Contains tools to help you prepare surface geometry for meshing.
global   Specifies the template file, current component, element order and size.
graphics subpanel   Determines the current graphics engine: standard or performance.
grid attribsEdits grid information.
grid labelsEdits grid label information.

hidden lineCreates hidden line and shaded image plots of elements.
hyperbeam   Defines beam section entities before entering the HyperBeam module.
import subpanel   Imports data to HyperMesh.
integrateAllows you to integrate a curve.
interfacesCreates and modifies interfaces that define a contact or sliding surface.
intersectCreates a line or lines where a plane intersects with a finite element model.
legendEdits the plot legend.
lengthDetermines the length of a group of selected lines.
line dragCreates a surface or mesh by dragging nodes, lines, or elements along a line.
line editCombines lines, splits lines at a point, at a joint, at a line, or at a plane, and smoothes lines.
line mesh   Creates 1-D elements between nodes or along a line.
linear 1d   Creates one-dimensional plot elements.
linear solidCreates solid elements between two groups of plate elements.
linesCreates lines by picking nodes.
load steps   Allows you to create and update collections of load collectors.
load typesSelects load types for new models or updates load types as defined in a template file.

maskMasks entities from the display list.
mass calcObtains the mass, area, and volume of selected elements or surface.
masses   Creates or updates mass elements.   
menu config subpanelLocated on the options panel; changes the size of HyperMesh menu and graphics fonts and cursor size, and specifies the Macro Menu.

momentsCreates or updates moments.
multibody joints   Defines kinematic joints between two local coordinate systems to connect two multibody collectors.
multibody planes   Creates rectangular, planar surfaces for use in multibody analysis.
node editAssociates, moves, or places nodes on a surface.
normalsDisplays and adjusts the normal of elements or surfaces.
numbersDisplays the IDs of entities.
objective   Allows you to define objective functions for optimization problems.
opti control   Allows you to control the optimization process.
optionsAllows you to determine tolerance, zoom factor, element shrink, pick handles, etc.
optimization module   Perform topology, topography, size, and shape optimizations.
opti rename   Renames the label of the optimization entities individually, or all at once.
opti reorder   Reorders optimization entities.
optistruct solver   Writes out OptiStruct input files and then solve by clicking the optistruct. button.

order changeChanges elements from first to second order, or vise versa.

organizeMoves or copies entities between components.
ossmooth   Extracts and imports the final design geometry from OptiStruct抯 topology, topography, and shape optimization results into HyperMesh
output blocks   Creates and updates blocks of entities used for output requests.

VibInfo 发表于 2007-6-2 08:16

page names subpanelLocated on the files panel; customizes the page names and titles of the main menu.
penetration   Checks groups for initial penetration problems.
permuteSwitches x, y, z data of entities.
planesCreates a planar surface or mesh bounded by planar lines.
plot titlesEdits plot titles.
plotsCreates new plots and allows you to select curves to include on the plot.
positionPositions entities in space by selecting nodes.
postscript subpanelLocated on the options panel; produces PostScript images (also use function key F4).
pressuresCreates or updates pressures.
project   Projects entities to a plane, vector, or surface.
quality index   Calculates a single value to represent the quality of the displayed shell (2D) model.
query curvesAllows you to find the x and y values of a point in a curve.
rbe3Creates or updates RBE3 elements.
read curves   Allows you to input an xy data set from an ASCII file.
reflectMirrors entities about a plane.
remapRe-maps nodes onto a line.
renameChanges collector names.
renumberRenumbers entities.
reorder   Changes the order of named entities in the database.
reparamCondenses line data to help increase processing speed.
replaceAllows you to manually equivalence nodes.
replayReplays previously saved animation sequences.
responsesAllows you to create responses for an optimization.
results curvesAllows you to create curves by extracting data from a HyperMesh results file.
rigid walls   Creates and updates rigid walls.
rigidsCreates or updates rigid or rigidlink elements.
rodsCreates or updates rod elements.
rotateRotates entities about a vector.
ruledCreates a surface or mesh from nodes or lines which are unconnected.
safety module   Contains the panels used for safety analysis.
scaleModifies the size of entities.
seatbelt   Allows you to create and route seatbelts onto a dummy.
section cutCuts a planar section through a group of lines.
sensor   Create and edit sensors.
shape   Allows you to perform shape optimization.
simple mathAllows you to perform simple math functions on a curve.
size   Allows you to setup and perform size optimization.
skinCreates a surface or mesh skin across a set of lines.
smoothImproves element quality on a surface mesh.
solid mapCreates a solid mesh by defining source, destination, and along surfaces.
solid meshCreates a solid mesh within a volume defined by edge lines.
solverAllows you to run an external program from within HyperMesh or assign and run a solver.

spaceball subpanelLocated on the options panel; allows changes to the operating characteristics of a spaceball device.
spheresCreates a spherical surface or mesh.
spinCreates a surface or mesh by rotating nodes, lines, or elements about a vector.
splineCreates a surface or mesh with lines.
splitSplits elements into pre-defined patterns.
spotweldCreates or updates spotweld elements.
springsCreates or updates spring elements.
summaryCreates a summary of elements, loads, and properties.
super elemsAssigns nodes to a super element set and displays the nodes of a super element set.
surf linesChanges the number of surface visualization lines.
surface editTrims surfaces with lines or surfaces, untrims surfaces, and creates surfaces that fill gaps in the model.
systemsCreates local coordinate systems.
table entries   Allows you to specify values for the constraints used in defining functions.
tags   Allows you to assign names to entities.
tangentsCreates tangent lines between a node and line or between two lines.
temp nodesAdds or removes temporary nodes.
temperaturesCreates or updates temperatures.
tetramesh   Allows you to fill an enclosed volume with first or second-order tetrahedral elements.

titlesCreates and edits screen titles.
topography   Allows you to setup and define topography optimizations.
topology   Allows you to setup and define topology optimizations.
torusCreates a toroidal surface or mesh.
transientCreates an animation sequence from transient results.
translateMoves entities along a vector.
vectors   Allows you to create a HyperMesh vector entity.
vector plotCreates vector plots from vector quantity results.
velocitiesCreates or updates velocities.
vis   Determines the display of entities in the model.
xy plots   XY plotting module contains the xy plotting panels.

wdb119 发表于 2007-9-11 10:51

ding

hao tie

octopussheng 发表于 2007-9-11 12:43

看着有点乱哦,版主最好稍微整理一下,呵呵,这样看着还蛮累的!

boyi0706 发表于 2007-10-12 18:14

不错

VibInfo 发表于 2007-10-29 09:37

本帖最后由 wdhd 于 2016-3-29 09:04 编辑

原帖由 octopussheng 于 2007-9-11 12:43 发表
看着有点乱哦,版主最好稍微整理一下,呵呵,这样看着还蛮累的!
等有时间的吧
页: [1]
查看完整版本: Hypermesh菜单上的关键字释意(按字母排序)