求助：求解过程中弹出的错误
*** WARNING *** CP = 13.500 TIME= 08:24:23Both solid model and finite element model boundary conditions have been
applied to this model.As solid loads are transferred to the nodes or
elements, they can overwrite directly applied loads.
*** WARNING *** CP = 22.266 TIME= 08:27:15
Previous testing revealed that 21 of the 254534 selected elements
violate shape warning limits.To review warning messages, please see
the output or error file, or issue the CHECK command.
*** ERROR *** CP = 10193.031 TIME= 08:33:07
Large negative pivot value ( -0.471122742 ) in Eqn.system.May be
because of a bad temperature-dependent material property used in the
model.
*** WARNING *** CP = 10193.422 TIME= 08:50:48
Smallest negative equation solver pivot term encountered at UY DOF of
node 38236.Check for an insufficiently constrained model.
0***** process error reported by subroutine xdslsl
see xdslsl abstract (ier =-604)
*** ERROR *** CP = 10227.609 TIME= 09:07:00
Input/Output error on unit = 9.Possible full disk.
最后也没有弹出求解结束
白白运算了24个小时，弹出了上面几个提示
请问该怎么解决啊？
都快疯了...... 求解时设置出现警告次数/NERR,100,100,OFF.default设置为5，超过5就不出现solution is done 调整一下网格
页:
[1]