向各位大师求助
小弟在启动服务的时候点击perform status enquiry出现如下提示是为什么啊?--------
Status
--------
Flexible License Manager status on Fri 5/14/2027 23:38
License server status: 27003@a30f41faa27d4d0
License file(s) on a30f41faa27d4d0: D:\ABAQUS\License\license.dat:
a30f41faa27d4d0: license server UP (MASTER) v10.8
Vendor daemon status (on a30f41faa27d4d0):
ABAQUSLM: The desired vendor daemon is down.
Check the lmgrd log file, or try lmreread.
Feature: adams
Vendor:Host: a30f41faa27d4d0
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-97,121
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Feature usage info:
Users of adams: Cannot get users of adams: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of aqua: Cannot get users of aqua: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of beamSectGen: Cannot get users of beamSectGen: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cadporter_catia: Cannot get users of cadporter_catia: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cadporter_catiav5: Cannot get users of cadporter_catiav5: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cadporter_ideas: Cannot get users of cadporter_ideas: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cadporter_parasolid: Cannot get users of cadporter_parasolid: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cadporter_proe: Cannot get users of cadporter_proe: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cae: Cannot get users of cae: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cmold: Cannot get users of cmold: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of cosimulation: Cannot get users of cosimulation: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of design: Cannot get users of design: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of explicit: Cannot get users of explicit: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of foundation: Cannot get users of foundation: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of moldflow: Cannot get users of moldflow: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of noGUI: Cannot get users of noGUI: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of parallel: Cannot get users of parallel: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of standard: Cannot get users of standard: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com".
Users of viewer: Cannot get users of viewer: No such feature exists.
Feature: adams
License path:27003@a30f41faa27d4d0
FLEXnet Licensing error:-5,222
For further information, refer to the FLEXnet Licensing End User Guide,
available at "www.macrovision.com". 自己解决了~
系统日期干到2027年去了~郁闷!一个晚上装了10多次了~哈哈
[ 本帖最后由 xinyuxf 于 2007-5-15 07:56 编辑 ] 我也遇到同样问题了，不知是否能告知解决方法? 谢了。 lincence没起来，网上搜一个abaqus的安装帮助，照着装就行了
不过要注意如果你呢机器装了UG的话最好改一个端口，不然有可能冲突的
页:
[1]