xshg3 发表于 2006-11-11 00:21

那位高手帮我看看这是什么问题吗？？？谢谢！

Error in job seismic:
THE REQUESTED MEMORY CANNOT BE ALLOCATED. PLEASE CHECK THE SETTING FOR PRE_MEMORY. THIS ERROR IS CAUSED BY PRE_MEMORY BEING GREATER THAN THE MEMORY AVAILABLE TO THIS PROCESS. POSSIBLE CAUSES ARE INSUFFICIENT MEMORY ON THE MACHINE, OTHER PROCESSES COMPETING FOR MEMORY, OR A LIMIT ON THE AMOUNT OF MEMORY A PROCESS CAN ALLOCATE.

ydliu_zn 发表于 2006-11-11 09:41

1，abaqus_v6.env中的参数pre_memory设置要变大，改成512MB
2，不必要的地方网格尽量粗画

xshg3 发表于 2006-11-11 16:40

请问主任，pre_memory在哪里可以设置？它是什么含义？

ydliu_zn 发表于 2006-11-11 16:51

abaqus安装文件里，如E:\ABAQUS\6.6-1\site中的abaqus_v6.env文件中将pre_memory和stan_memory改大
页: [1]
查看完整版本: 那位高手帮我看看这是什么问题吗？？？谢谢！