figo-sk 发表于 2006-10-25 15:54

Gambit里的一个问题

我画网格的时候，画完后出现这样的话：
    Initialization failed;perturb boundary nodes and try again. Initialization failed to mesh 5 nodes.
   ERROR:TG_Mesh_Domain failed with error code 1.
   ERROR: Tetrahedral meshing has failed for volume lolune 2.
This is usually caused by problems in the face meshes.
   Check the skewness ofyour faxe meshes and make sure the face mesh sizes are not too large in areas of small gaps.

不知道是怎么回事，请教各位大侠了！谢谢！

zyj1002 发表于 2006-10-25 17:05

斜度太大,网格质量不高,重新划分网格

shenzh 发表于 2006-10-25 21:27

好像有小区域划分不成功。
页: [1]
查看完整版本: Gambit里的一个问题