能帮我看看这些错误是怎么回事吗？
<P><BR> *** WARNING *** CP= 10.685 TIME= 17:07:03<BR> Real constant 2 referenced by at least element types 4 and 2. </P><P> *** WARNING *** CP= 10.826 TIME= 17:07:03<BR> Finer mesh required near center line for element 5957. </P>
<P> *** WARNING *** CP= 10.826 TIME= 17:07:03<BR> Finer mesh required near center line for element 5982. </P>
<P> *** WARNING *** CP= 10.826 TIME= 17:07:03<BR> Finer mesh required near center line for element 6007. </P>
<P> *** ERROR *** CP= 10.826 TIME= 17:07:03<BR> Negative radius on element 6257. <BR><BR><BR>怎么处理？谢谢 </P>
回复：（yuqiangliu）能帮我看看这些错误是怎么回事吗...
<P>应该是面的尺寸相差太大的原因造成的<BR><BR>用手动定义一下，然后再mesh看看</P> *** WARNING *** CP= 10.685 TIME= 17:07:03<br>Real constant 2 referenced by at least element types 4 and 2. <br>两种单元类型共用同一个realconstant设定，你设置的时候有没有弄错？<br><br>*** WARNING *** CP= 10.826 TIME= 17:07:03<br>Finer mesh required near center line for element 5957. <br>单元尺寸太大了似乎。<br><br>*** ERROR *** CP= 10.826 TIME= 17:07:03<br>Negative radius on element 6257. <br>只可能就是单元尺寸不合适带来的后果。<br><br>按visualsun建议的做吧[此贴子已经被作者于2005-8-30 22:35:19编辑过]
<P>感谢 非常非常感谢！</P>
请大家再帮我看看这个错误好吗？
<P>** WARNING *** CP= 15.653 TIME= 14:25:05<BR> Both solid model and finite element model boundary conditions have been <BR> applied to this model.As solid loads are transferred to the nodes or<BR> elements, they can overwrite directly applied loads. </P><P> *** WARNING *** CP= 17.645 TIME= 14:26:14<BR> Constraint from line 5 not transferred to undefined or unselected node<BR> 253. </P>
<P> *** WARNING *** SUPPRESSED MESSAGE CP= 22.382 TIME= 14:31:15<BR> Node 6470 on element 2352 is unselected. <BR><BR><BR>请问这些错误 我怎么处理啊？<BR>还有我分析一个房间的墙壁隔声效果？用2d分析怎么加约束？是不是一定要加约束的啊？谢谢 </P> *** WARNING *** SUPPRESSED MESSAGE CP= 22.382 TIME= 14:31:15<BR>Node 6470 on element 2352 is unselected.<BR>unselected node 在分析中会被剔除掉，所以在solve之前，要把所有有关的node,element 选择上。<BR><BR>** WARNING *** CP= 15.653 TIME= 14:25:05<BR>Both solid model and finite element model boundary conditions have been <BR>applied to this model.As solid loads are transferred to the nodes or<BR>elements, they can overwrite directly applied loads. <BR>所有施加在实体上的载荷在求解之前会被ansys转化为节点载荷，所以在模型中如果同时施加实体载荷和节点或单元载荷，就需要注意两者不要冲突了。实体载荷是在直接施加的节点载荷之后进行处理的，所以会把直接施加的节点载荷覆盖掉。<BR><BR><BR>建议你提问的时候把题目写清楚，这样方便别人也方便你自己。 <STRONG><FONT face=Verdana color=#da2549>FSI 谢谢你下次我会把题目尽量写清楚。谢谢的热情回答</FONT></STRONG>
页:
[1]