sammy 发表于 2006-6-8 12:16

请教一个LS-DYNA的问题

本帖最后由 wdhd 于 2016-3-24 16:19 编辑

  /FILNAME,PENETRATION,0

  ls-dyna (version 970 ) date 01/10/2005

  *** Error line number 2 contains improperly formatted data

  ***********************************************line# 2

  /TITLE,ANALYSIS OF PENETRATION

  ***********************************************************

  *** Error reading 1st control card

  E r r o r t e r m i n a t i o n

  Memory required for explicit solution : 0

  Additional dynamically allocated memory: 0

  Total: 0

  T i m i n g i n f o r m a t i o n

  CPU(seconds) %CPU Clock(seconds) %Clock

  ----------------------------------------------------------------

  Initialization ....... 1.0000E+00 100.00 1.8700E-01 100.00

  Element processing ... 0.0000E+00 0.00 0.0000E+00 0.00

  Binary databases ..... 0.0000E+00 0.00 0.0000E+00 0.00

  ASCII database ....... 0.0000E+00 0.00 0.0000E+00 0.00

  Contact algorithm .... 0.0000E+00 0.00 0.0000E+00 0.00

  Contact entities ..... 0.0000E+00 0.00 0.0000E+00 0.00

  Rigid bodies ......... 0.0000E+00 0.00 0.0000E+00 0.00

  Implicit Nonlinear ... 0.0000E+00 0.00 0.0000E+00 0.00

  Implicit Lin. Alg. ... 0.0000E+00 0.00 0.0000E+00 0.00

  ----------------------------------------------------------------

  T o t a l s 1.0000E+00 100.00 1.8700E-01 100.00

  Problem time = 0.0000E+00

  Problem cycle = 0

  Total CPU time = 1 seconds ( 0 hours 0 minutes 1 seconds)

  CPU time per zone cycle = 0 nanoseconds

  Clock time per zone cycle= 0 nanoseconds

  Number of CPU's 1

  NLQ used/max 96/ 96

  Start time 06/08/2006 10:34:41

  End time 06/08/2006 10:35:03

  Elapsed time 22 seconds ( 0 hours 0 minutes 22 seconds)

  E r r o r t e r m i n a t i o n

  这是后来MESSAGE里面的,那里出了问题呢

zhangmeng 发表于 2006-6-9 15:38

好像是接触定义有了问题
页: [1]
查看完整版本: 请教一个LS-DYNA的问题