运算时出错 请问是怎么回事
本帖最后由 池小乙 于 2013-5-15 10:05 编辑按照李增刚的书第3章，计算 多孔管消声器是 前部分工作都设置好了在运算时出现以下问题。我的电脑是WIN7 64 位的 装的软件是32位的。 请问这是怎么回事。 另附 模型 是不是哪里设置错误。
你把这个错误窗口拖开，看看后面的计算日志啊。
另外你上传的模型不全，同名文件夹以及引用的模型文件要一起打包上传。 附件 附上一次只能300K?? 再来一卷 最后一卷 解压后放在同个文件夹 lengxuef 发表于 2013-5-15 08:39 static/image/common/back.gif
你把这个错误窗口拖开，看看后面的计算日志啊。
另外你上传的模型不全，同名文件夹以及引用的模型文件要一 ...
能不能帮我看看 附件上传了 job details 内容如下
XPR VERSION 11-SL2
Requested task is SYSNOISE sequential computation.
Working directory on server is C:\Users\ADMINI~1\AppData\Local\Temp
Checking that the SYSNOISE launch script (D:\Program Files\LMS\LMS Virtual.Lab 11-SL2\VirtualLab\Sysnoise\5.6\bin\sysnoise_nogui.bat) exists on server...
OK
SYSNOISE log file on server is C:\Users\ADMINI~1\AppData\Local\Temp\Administrator-35223-sysnoise.log.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxJOB EXECUTION START
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
System for Computational Vibro-Acoustics
------------------------------------------------------------------------
SYSNOISE Rev 5.6 WinNT MAR2003 DATE: 15-MAY-2013 10:31:27
PATCH LEVELO(Build Date: 18-FEB-2013)
READING THE SET-UP FILE: D:\Program Files\LMS\LMS Virtual.Lab 11-SL2\VirtualLab\Sysnoise\5.6\bin\\..\res\SYSNOISE.STP
THE SYSNOISE PROFILE FILE NAME HAS NOT BEEN DEFINED.
STANDARD GRAPHIC DEVICE SET TO DEFAULT
PLOTTING GRAPHIC DEVICE SET TO SCREENDUMP
MEMORY IN USE = 800000
AVAILABLE MEMORY= 446000000
FREE MEMORY = 445200000
CREATING DEFAULT SYSNOISE MODEL FILE default.sdb
SYSNOISE ANALYSIS OPTION :
BEM INDIRECT VARIATIONAL UNBAFFLED FREQUENCY FLUID
SYSNOISE>SCL> ENVIRONMENT SECTION SETUP USRDIR 'C:\Users\ADMINI~1\AppData\Local\Temp\' RETURN
SYSNOISE>SCL> ENVIRONMENT SECTION SETUP TMPDIR 'C:\Users\ADMINI~1\AppData\Local\Temp\' RETURN
SYSNOISE>SCL> Open Model 1 File Administrator-35223-Acoustic.sdb Original Return
OPENING SYSNOISE MODEL FILE Administrator-35223-Acoustic.sdb
LOADING MODEL Exported VLModel
SYSNOISE>SCL> Extract Summary Return
SYSNOISE ANALYSIS OPTION :
FEM VARIATIONAL FREQUENCY FLUID
SYSNOISE SUMMARY INFORMATION
------------------------------------------------------------------------
Title...Exported VLModel
Date....15-MAY-2013 10:31:27
Number of dimensions...................... 3
Number of nodes...........................14757
Number of elements........................12120
Number of tables.......................... 12
Number of material characteristics........ 1
Number of transfer admittance relations... 2
Number of faces with transfer admittance.. 3160
Number of load cases...................... 1
Number of faces with velocity B.C.'s...... 36
Number of faces with admit/imped B.C.'s... 36
------------------------------------------------------------------------
SYSNOISE>SCL> Option FEM Frequency Fluid Return
SYSNOISE ANALYSIS OPTION :
FEM VARIATIONAL FREQUENCY FLUID
SYSNOISE>SCL> Environment Section SETUP BELL 'on' Return
SYSNOISE>SCL> Environment Section SETUP SOLVITER 0 Return
SYSNOISE>SCL> Environment Section SETUP STABLEFEM TRUE Return
SYSNOISE>SCL> Environment Section SETUP GEO_TOLERANCE '1E-006' Return
SYSNOISE>SCL> Parameter Model 1Physical
PARAMETER>SCL> Save Potentials Step 1
PARAMETER>SCL> Save Results none
PARAMETER>SCL> Store Results none
STORE RESULTS>SCL> ReturnNoFlow
PARAMETER>SCL> Return
Updating Model Parameters
SYSNOISE>SCL> Solve
SOLVE>SCL>Frequency 100 To 200 LinStep 10
SOLVE>SCL> Return
========================================================================
FREQUENCY RESPONSE MODULE
------------------------------------------------------------------------
FOR 11 FREQUENCIES FROM 100.000 TO 200.000 HZ
ANALYSIS # 1FREQUENCY = 100.000 HZTYPE = NORMAL
ANALYSIS # 2FREQUENCY = 110.000 HZTYPE = NORMAL
ANALYSIS # 3FREQUENCY = 120.000 HZTYPE = NORMAL
ANALYSIS # 4FREQUENCY = 130.000 HZTYPE = NORMAL
ANALYSIS # 5FREQUENCY = 140.000 HZTYPE = NORMAL
ANALYSIS # 6FREQUENCY = 150.000 HZTYPE = NORMAL
ANALYSIS # 7FREQUENCY = 160.000 HZTYPE = NORMAL
ANALYSIS # 8FREQUENCY = 170.000 HZTYPE = NORMAL
ANALYSIS # 9FREQUENCY = 180.000 HZTYPE = NORMAL
ANALYSIS # 10FREQUENCY = 190.000 HZTYPE = NORMAL
ANALYSIS # 11FREQUENCY = 200.000 HZTYPE = NORMAL
------------------------------------------------------------------------
SOLVE PARAMETERS
MODEL: 1 - Exported VLModel
------------------------------------------------------------------------
PHYSICAL Coordinates
Saving POTENTIALS every 1 steps
No saving of RESULTS
Energy Calculation Enabled
Surface post-processing on positive side
------------------------------------------------------------------------
LAUNCHING UNCOUPLED ACOUSTIC FEM (Physical Coords - Freq) ANALYSIS
(8) RLM: Cannot checkout license
server D;\Program Files\RLM\LMS.lic reported for feature LMS_VL_VAM_36(lms_vltoken:88): Cannot checkout rlm_roam license. (RLM error -34) ERROR : NO LICENSE GRANTED FOR MODULE LMS_VL_VAM_36.
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
SYSNOISE Rev 5.6 WinNT MAR2003 DATE: 15-MAY-2013 10:31:28
CPU Stats --- Delta:0:00:01 ( 1.20)Total:0:00:01 ( 1.20)
ERROR: Sysnoise terminated with an error!
**** ERROR has occurred during computation ****
You may try to compute the solution in manual mode and try to attach the results afterwards.
池小乙 发表于 2013-5-15 10:34 static/image/common/back.gif
job details 内容如下
XPR VERSION 11-SL2
Requested task is SYSNOISE sequential computation.
你64位系统怎么装32位的软件？这个，，，， wkl1987 发表于 2013-5-15 11:06 static/image/common/back.gif
你64位系统怎么装32位的软件？这个，，，，
我在32 位系统和 64位系统运行都出现上面同样的问题。 至于为什么64位系统装32位软件。是因为有多台电脑，有64位32位的。为了省事就下载32位软件。64位系统不是向下兼容麽。 本帖最后由 wkl1987 于 2013-5-15 14:56 编辑
池小乙 发表于 2013-5-15 11:16 http://forum.chinavib.com/static/image/common/back.gif
我在32 位系统和 64位系统运行都出现上面同样的问题。 至于为什么64位系统装32位软件。是因为有多台电脑， ...我说是你安装问题，64位的virtual.lab SL-2我装了几个64位电脑都没问题的，32位的却基本不能算。你在好好检查下
好吧，我的64位系统都好好地用啊 NO LICENSE GRANTED FOR MODULE LMS_VL_VAM_36
license的问题 Acoustic Transfer Relation Admittance 定义的这两个声传递导纳有问题，仔细检查一下。 对，应该是有两个问题，lengxuef都指出来了。 lengxuef 发表于 2013-5-15 19:00 static/image/common/back.gif
NO LICENSE GRANTED FOR MODULE LMS_VL_VAM_36
license的问题
license 的问题如何解决？快疯了，还有望指点。 superxjw 发表于 2013-5-15 21:47 static/image/common/back.gif
对，应该是有两个问题，lengxuef都指出来了。
谢谢 ， 在设置导纳属性的时候，组（曲面）的选择是不是有先后顺序的。比如 第一个要选进气管的表面组 再选对应消声器的组。两个顺序是不是不能颠倒？
页:
[1]
2