各路大哥，用LS-dyna仿真，出现如下错误，请求帮助！！！
各路大概，用LS-dyna仿真，出现如下错误，是什么原因？？？请求帮助！！！Input file: transient1.k
The native file format : 32-bit small endian
Memory size from default : 20000000
expanding memory to 20000000 starting ls-dyna
********notice********notice********notice********
* *
* This is the LS-DYNA Finite Element code. *
* *
* Neither LSTC nor the authors assume any responsibility for *
* the validity, accuracy, or applicability of any results *
* obtained from this system. The user must verify his own *
* results. *
* *
* LSTC endeavors to make the LS-DYNA code as complete, *
* accurate and easy to use as possible. *
* Suggestions and comments are welcomed.Please report any*
* errors encountered in either the documentation or results*
* immediately to LSTC through your site focus. *
* *
* Copyright (C) 1990-2010 *
* by Livermore Software Technology Corp. (LSTC) *
* All rights reserved *
* *
********notice********notice********notice********
contracting memory to 1 beginning of keyword reader
expanding memory to 22280
expanding memory to 459166
expanding memory to 5422090
expanding memory to 5452090
expanding memory to 5528002
expanding memory to 5557990
expanding memory to 6660166
expanding memory to 7762342
expanding memory to 7783776
expanding memory to 7838376
expanding memory to 7868076
expanding memory to 7888076
expanding memory to 7968906
expanding memory to 8039736
expanding memory to 10296310
expanding memory to 10369792
expanding memory to 15291694
expanding memory to 15362524
Memory required to process keyword : 15362524
contracting memory to 1 end of keyword reader
LS-DYNA will perform a structural only analysis
Model asm1012
ls-dyna ls971s.59419 R5.0 date 04/10/2010
expanding memory to 4129 material, node and element data
expanding memory to 4227 material properties
expanding memory to 3088435 element data
expanding memory to 3725912 gradient of damage data
expanding memory to 7874784 user control for contact interfaces
expanding memory to 7874792 for boundary cond. vectorization
contracting memory to 7874764 nodal data
expanding memory to 8147982 arbitrary element numbering input
contracting memory to 7874764 thick shell int. pt. strain
expanding memory to 12617834 process element material data
expanding memory to 12619855 load curve data
contracting memory to 12619756 regularize time history data
contracting memory to 12619552 rigidwall definitions
expanding memory to 12690419 velocity b.c
expanding memory to 12773315 nodal constraint sets
expanding memory to 14676885 contact interfaces
expanding memory to 14819543 implicit contact 1
expanding memory to 15915069 implicit contact 2
*** Error 2216 (STR+216)
part # 2 is out-of-range
2
input phase will continue if possible
*** Error 2216 (STR+216)
part # 4 is out-of-range
4
input phase will continue if possible
*** Error 2216 (STR+216)
part # 6 is out-of-range
6
input phase will continue if possible
*** Error 2216 (STR+216)
part # 8 is out-of-range
8
input phase will continue if possible
*** Error 2216 (STR+216)
part # 7 is out-of-range
7
input phase will continue if possible
*** Error 2216 (STR+216)
part # 11 is out-of-range
11
input phase will continue if possible
contracting memory to 14819134 contact segment data 1
contracting memory to 14817916 contact segment data 2
expanding memory to 17226059 contact segment data 3
contracting memory to 16785510 contact definition
expanding memory to 16998770 rigid body
*** Error 2216 (STR+216)
part # 4 is out-of-range
4 5
input phase will continue if possible
*** Error 2216 (STR+216)
part # 5 is out-of-range
4 5
input phase will continue if possible
*** Error 2363 (STR+363)
on rigid body merge card number 1
part 4 is not material type 20-rigid
*** Error 2363 (STR+363)
on rigid body merge card number 1
part 4 is not material type 20-rigid
*** Error 2216 (STR+216)
part # 7 is out-of-range
7 8
input phase will continue if possible
*** Error 2216 (STR+216)
part # 8 is out-of-range
7 8
input phase will continue if possible
*** Error 2363 (STR+363)
on rigid body merge card number 2
part 7 is not material type 20-rigid
*** Error 2363 (STR+363)
on rigid body merge card number 2
part 7 is not material type 20-rigid
contracting memory to 16822850 contact friction
expanding memory to 16912109 joints
contracting memory to 16912109 accelerometers
expanding memory to 16912209 rigid bodies for disp. termination
contracting memory to 16912209 transformation to move nodes
expanding memory to 16912216 thermal expansion 0
expanding memory to 16912223 flexible body 2
contracting memory to 16912223 implicit joints
expanding memory to 16912226 minimum contact gap for auto switching
*** Error 2018 (STR+18)
input phase completed with 14 fatal errors
please check messag file
我也出现类似问题，求大神解答
页:
[1]