liuyang08034203 发表于 2012-4-29 16:22

小弟做压气机叶轮强度校核，计算结果出现了较大的变形量，求助？

Warning: One or more bodies may be underconstrained and experiencing rigid body motion. Weak springs have been added to attain a solution.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:17 PM
Warning: An iterative solver was used for this model.However, a direct solver may enhance performance.Consider specifying the use of a direct solver.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:19 PM
Warning: The deformation is large compared to the model bounding box.Verify boundary conditions or consider turning large deflection on.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:19 PM
小弟做压气机叶轮强度校核，将fluent的压力载荷作用于叶片，还施加离心力和重力，在结果中出现了大的变形量，为200m，这肯定错了，请各位大侠分析一下原因。小弟先谢了

lvpengly 发表于 2012-5-26 16:52

单位统一了吗？单位不统一会导致这个问题
页: [1]
查看完整版本: 小弟做压气机叶轮强度校核，计算结果出现了较大的变形量，求助？