liuyang08034203 发表于 2012-4-29 16:20

小弟做压气机叶轮强度校核,计算结果出现了较大的变形量,求助?

Warning: One or more bodies may be underconstrained and experiencing rigid body motion. Weak springs have been added to attain a solution.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:17 PM
Warning: An iterative solver was used for this model.However, a direct solver may enhance performance.Consider specifying the use of a direct solver.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:19 PM
Warning: The deformation is large compared to the model bounding box.Verify boundary conditions or consider turning large deflection on.Refer to Troubleshooting in the Help System for more details.        Project>Model>Static Structural>Solution        4/30/2012 12:31:19 PM
小弟做压气机叶轮强度校核,将fluent的压力载荷作用于叶片,还施加离心力和重力,在结果中出现了大的变形量,为200m,这肯定错了,请各位大侠分析一下原因。小弟先谢了
页: [1]
查看完整版本: 小弟做压气机叶轮强度校核,计算结果出现了较大的变形量,求助?