裂纹扩展测试的裂纹扩展片-测量裂纹长度
上海褒博机电科技有限公司www.servotesting.com
info@servostering.com
132 9607 7830
裂纹长度测试是疲劳裂纹扩展研究的前提，而基于间接电流电位法测量裂纹长度的裂纹扩展片具有精度高、成本低、操作简单、抗干扰性强和自动记录与处理等优点。
附件为国内一篇关于裂纹扩展片的介绍。
链接为产品资料下载地址。上海褒博-裂纹扩展测量仪Fractomat_e.pdf
FRACTOMAT® MODEL2010
Part noDescription
2010FRACTOMAT® MODEL 2010
TWO-CHANNEL CRACK-LENGTH MEASURINGAND CONTROL
SYSTEM FOR THR “KRAK-GAGE INDERECTPOTENTIAL DROP
TEST METHOD.Complete Test System Includes:
- Two Precision (0.01%) 4 ½ Digit PANEL DISPLAYS for Channels A and B.
- Microprocessor based control with memory for all switchable Functions,Including Status indicators.
- Ten Calibrated SCALE RANGES for each channel for KRAK-GAGES®.
- Two Calibrated LIMIT DETECTORS with relay contact outputs.
- Two ZERO-CALIBRATION Circuits each with 4 adjustable Precision currentsources.
- Built-in Integral FRACTOMAT® CALIBRATOR.
- ANALOG VOLTAGE OUTPUTS on a pair of front panel tip Jacks for each channel.
- ANALOG AND LIMIT DETECTOR OUTPUTS on a rear panel Connector.
- POWER INPUT Module on the rear panel including ON/OFF Switch, AC power linefilter and Fuse Drawer. Power input
Is 110-2240 VAC. (no range selection necessary).
- INPUT CABLES, CH A & B, 2 each color coded, 10 ft. long.
- Instruction / Operating Manual in English.
- Universal brushed aluminum andblack vinyl enclosure for Benchtop or 19-in. rack mounting (17 in. W, 5 ¼ in.H, 10 in. DP) Net Weight: 12 lbs. Gross Shipping Weight: 18 lbs.
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
FRACTOMAT®
QuantityDiscount Schedule
Applies to multiple purchases ofFRACTOMAT®, Model 2010 on Single purchase order.
2 Units
3 Units
4 – 6 Units
7-10 Units
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
KRAK-GAGE®
Part noDescription
KRAK-GAGE®, STANDARD GAGE, -100°F to 300°F with epoxy-phenolic fiberglass reinforced backing, 50micron (.002 in.)
thick, constantan alloy, 5 micronthick, including separate epoxy glass solder terminals (4 each gages).
KG-A055 mm, packaged @ 6 gages/ea. per pkg
KG-A1010 mm, packaged @ 6 gages/ea. per pkg
KG-A1515 mm, packaged @ 6 gages/ea. per pkg
KG-B2020 mm, packaged @ 6 gages/ea. per pkg
KG-B2525 mm, packaged @ 6 gages/ea. per pkg
KG-B3030 mm, packaged @ 6 gages/ea. per pkg
KG-C4040 mm, packaged @ 4 gages/ea. per pkg
KH-C5050 mm, packaged @ 4 gages/ea. per pkg
KG-D100100 mm, packaged @ 2 gages/ea. per pkg
KG-E200200 mm, packaged @ 1 gage ea. per pkg
FOR BOLT HOLES,SERIES –BH
KRAK-GAGE®, SERIES – BH for bolt holes, constantan alloy 5 micron, epoxy phenolic backing,fiberglass reinforced, 50 micron
nominal thickness, -100° F to +300°F. Including separate epoxy glass solderterminals. Furnished with calibration curves. All packaged @ 4 gages ea. Perpkg.
KG-BH3125-CEFor 0.3125 In. max dia., 12 mm crack length
KG-BH4375For 0.4375 In. max. dia., 18 mm crack length
KG-BH5616-X08For 0.5625 In. max dia., 8 mm crack length
KG-BH5616-x15For 0.5625 In. max. dia., 15 mm crack length
KG-BH5625For 0.5625 In. max. dia., 22 mm crack length
KGBH7500For 0.7500 In. max. dia., 28 mm crack length
KG BH10000For 1.0000 In. max dia., 38 mm crack length
Quantity Discount Schedule:
KRAK-GAGE®
Same Type Gageson single order:
1-4 Pkgs. – Net
5-9 Pkgs. – Less 10%
10-24 Pkgs. – Less 16%
25 up Pkgs. – Less 20%
file:///C:\Users\a\AppData\Local\Temp\msohtmlclip1\01\clip_image001.gif
ACCESSORIES& BONDING JIGS
Part No.Description
353-ND
EPOXY ADHESIVE, TTI 353-ND, Per Bulletin 8010-2r1, Kit of 4 eachpre-weighed mixing pouches of 4 grams net adhesive (16 grams).
TSC-BJTEFLON CURING SHEETS, for use with Bonding Jigs. 10 mils thick
(0.010”). Kit of 4 sheets each, 5” X 8”.
SRP-BJSILICONE RUBBER PRESSURE PADS, 1/8” thick with silicone Adhesive backingon one side, 50 durometer, for use with Bonding Jigs. Kit of 2 pads each4.25” wide X 9.00” long.
ICA-2005INPUT CABLE ASSEMBLIES, with color-coded Lemo connectors and 10 ft.shielded cable. Spare set of 2 each.
IME-2005SPARE INSTRUCTION MANUAL, for FRACTOMAT® KRAK-GAGE ® 2 in. ring binder,(English only)
BONDING/CURING JIGS, per Technical Bulletin BJ-581, of Aluminum andstainless steel, with Silicone Pressure Pads and Teflon Curing Sheets,Maximum cure pressure 30-35 psi, Maximum bonding temperature 250 F.
BJ-A05For maximum size – A05 KRAK-GAGE®, 10X10 mm or ½ “ X ½” Impact or Bendspecimens.
BJ-B25For maximum size – B25 KRAK-GAGE® maximum specimen size 3.00” wide X1.75” thick.
BJ-B30For maximum size – B30 KRAK-GAGE®., maximum specimen size
5.25” wide X 2.00” thick.
BJ-C50For maximum size – C50 KRAK-GAGE®, maximum specimen size
6.00” X 3.00” thick.
-CNor specify - Option –CN for pad size for center-notched specimens formaximum 2 ea. –B30 KRAK-GAGES®.
页:
[1]