ANSYS-LS/DYNA求解时出现错误，找不到批处理文件
求解时提示找不到批处理文件，让看message，以下是error部分，请高手指点，应如何操作。*** Error inertia properties of rigid body material # 2
illegal principal inertias of body
i11 = 0.1000E+03
i22 = -0.1000E+03
i33 = 0.1000E+03
slave surface of interface = 1
type = a 3
surface timestep = 3.403E-05
controlling slave node ID = 73393
part ID of slave node = 3
current minimum time step = 3.403E-05
master surface of interface= 1
type = a 3
surface timestep = 4.539E-05
controlling master node ID = 1
part ID of master node = 1
current minimum time step = 3.403E-05
slave surface of interface = 2
type = a 3
surface timestep = 3.403E-05
controlling slave node ID = 73393
part ID of slave node = 3
current minimum time step = 3.403E-05
master surface of interface= 2
type = a 3
surface timestep = 4.539E-05
controlling master node ID = 60001
part ID of master node = 2
current minimum time step = 3.403E-05
The LS-DYNA time step size should not exceed 3.403E-05
to avoid contact instabilities.If the step size is
bigger then scale the penalty of the offending surface.
*** Error initialization completed with 1 fatal errors
please check messag file
E r r o r t e r m i n a t i o n
s t o r a g e a l l o c a t i o n
Memory required to complete solution : 7511232
Additional dynamically allocated memory: 3357609
Total: 10868841
检查你的材料参数是否完整、合理 回复 2 # Chelsea 的帖子
请问求解时出现如下warring是什么原因，应该怎么解决，谢谢，老出现这个问题。*** Warning Initialization
single surface interface # = 1
penetrating node # = 11628
segment # = 1232
penetration = -0.3474137E-01
remaining distance to shell midsurface =0.0000000E+00
s,t = 0.9984597E+000.2293782E+00
penetrated segment nodes:
6486 959 960 6513
original coordinates of slave node = 11628
x-coordinate =-0.181173337E+01
y-coordinate =-0.219885197E+02
z-coordinate = 0.136857273E-13
modified coordinates of slave node = 11628
x-coordinate =-0.180396208E+01
y-coordinate =-0.220223275E+02
z-coordinate =-0.189861986E-02
谢谢！！！ 我也遇到了相关的轧制情况，还望高手给解决一下，谢谢。
页:
[1]